Verado 250 Specifications |
| Propshaft Rated Horsepower (HP / kW) |
250/186 |
| Max RPM (WOT) |
5800-6400 |
| Cylinder/Configuration |
Straight 6, 24-valve direct acting double overhead cam (DOHC) |
| Displacement (CID/cc) |
158.5/2598 |
| Displacement Liter/CID |
2.6/158.5 |
| Bore & Stroke (in) |
3.23 x 3.23 |
| Bore & Stroke (mm) |
82 x 82 |
| Compression Ratio |
8.35:1 |
| Fuel Induction System |
SmartCraft DTS electronic throttle, supercharged with charge air cooling and electronic boost pressure control |
| Fuel System |
Computer controlled Sequential Multi-Port Electronic Fuel Injection (EFI) |
| Fuel Requirements |
Unleaded Regular 87 Octane Minimum (R M/2) |
| Ethanol Tolerance |
Up to 10% |
| Ignition System |
SmartCraft PCM 07 Digital Inductive |
| Charging System |
Fully regulated belt driven 70-amp (882 watt) |
| Starting |
Electric (Turn-key) |
| Exhaust System |
Through Prop |
| Cooling System |
Water cooled with thermostat & pressure control |
| Lubrication System |
Integrated dry sump |
| Oil Requirement |
NMMA Certified FCW SAE 25W-40 |
| Oil Capacity - Quarts (qts.) |
8.5 |
| Oil Capacity - Liters (l) |
8 |
| Engine Management System |
SmartCraft PCM 07 |
| Engine Control System |
SmartCraft Digital Throttle & Shift (DTS) |
| Engine Protection System |
SmartCraft Engine Guardian |
| Gear Shift |
SmartCraft DTS, F-N-R |
| Gear Ratio |
1.85:1 |
| Shaft Length (inches) |
20/25/30 |
| Shaft Length (mm) |
508/635/762 |
| Counter Rotation |
Available on 25" (CXL) and 30" (CXXL) models |
| Trim System |
SmartCraft programmable power trim and tilt |
| Maximum Tilt Range |
73° (-6° to 67°) |
| Maximum Trim Range |
20° (-6° to 14°) |
| Steering |
Electro-Hydraulic Power Steering w/Integral Hydraulic Cylinder |
| SmartCraft |
Compatible |
| Weight (lbs / kg) |
635 / 288 |